Product description
The workshop heater has a powerful fan for optimal distribution of heated air in large spaces. Applications can be found in: workshop, garage, factory hall, construction site, stable, storage shed or barn. These heaters in splash-proof housing are corrosion-resistant and specially designed for intensive use in rough conditions.
Applications
Recessed control buttons
The workshop heater is operated with a handy 5-position switch:
- Device is switched off
- Fan is running (no heating)
- Fan and heating at 50%
- Fan 100% and heating 50%
- Fan + heating at full power
Temperature control and security
A built-in thermostat measures the temperature in the room and ensures that the heater does not consume more energy than necessary. The thermostat has a rotary head for the range of 0 to 40 degrees °C and an automatic reset. In addition, the workshop heater is protected with a limiter (separate maximum thermostat), which automatically switches off the heating elements when the temperature is too high.
Loose on the floor or fixed to the wall
The fan heaters are easy to move, thanks to their relatively low weight, and with the handy tube frame you can easily place them on the floor. An optional mounting bracket is available for fixed mounting on a wall. The devices are maintenance-free and easy to use. In dusty environments, periodic blowing with compressed air is sufficient for reliable operation and a long service life. This series of workshop heaters is available in 2 sizes. The small ones from 2 to 9 kW, for 230 and 3x 400 Volt and the large version for 3 x 400 V goes from 12 to 24 kW. The single-phase fan heaters are equipped with a power cord with plug. The 3-phase versions do not have a plug and must be connected directly to the mains by an electrician: the heaters up to 9 kW have a connection cable with 4x 1.5 mm² and the heavier version is equipped with 4 x 4 mm² wires.
Electric workshop heaters 230 V - 1 phase
- 2,000 Watts - 39 x 47 x 35 cm
- 3,000 Watts - 39 x 47 x 35 cm
Electric workshop heaters 3 x 400 V
- 3,000 Watts - 39 x 47 x 35 cm
- 6,000 Watts - 39 x 47 x 35 cm
- 9,000 Watts - 39 x 47 x 35 cm
- 12,000 Watts - 43 x 51 x 45 cm
- 15,000 Watts - 43 x 51 x 45 cm
- 18,000 Watts - 43 x 51 x 45 cm
- 21,000 Watts - 43 x 51 x 45 cm
- 24,000 Watts - 43 x 51 x 45 cm
Specifications
- Type: electric air heater
- Manufacturer: European (EC)
- Heating elements: RVS304
- Working voltage: 230 or 3x 400 V
- Length of power cord (230V): 170 cm
- Length of connection cable (400V): 200 cm
- Plug: only 1-phase devices
- Casing: powder-coated
- Colour: RAL 5003
- Built-in fan: yes
- Anti-impact tube frame: yes
- Wall mounting bracket: optional
- Control: 5 settings
- Splash-proof: IP54
- Manual: NL
- Quality mark: CE
*Please note: when purchasing some products from our webshop, a basic knowledge of electrical engineering is required (for installation).