Product Description
Heating wire for low voltage
Very thin heating wire, safe for wet areas. Ultrathin: including the heat resistant jacket less than one millimeter in diameter! This heating wire is intended for specialist applications in the field of (floor) heating and frost protection. Useful when you want to work with safe low voltage or when only little heat power is needed.
Applications
Heating wire 12V, 24V and 230V
- 90 cm = 10.4 Watt (24V) + connecting cables
- 140 cm = 15.2 Watt (24V) + connecting cables
- 170 cm = 17.5 Watt (24V) + connecting cables
- 270 cm = 30.4 watts (24V) + connecting leads
- 460 cm = 48 watts (24V) + connecting cables
- 640 cm = 70 watts (24V) + connecting cables
- 16 meters = 170 watts (230V) - without connection cables
- 27 meters = 280 watts (230V) - without connecting cables
- 44 meters = 460 watts (230V) - without connecting cables
- 64 meters = 640 watts (230V) - without connecting cables
- 78 meters = 785 watts (230V) - without connecting cables
- 87 meters = 880 watts (230V) - without connecting cables
- 106 meters = 1065 watts (230V) - without connecting cables
- 90 cm = 10.4 watts (12V) + connecting cables
Can work on battery, via a mains adapter or via direct connection to the mains. Available for this purpose is the Transformer 24V-IP65.
Heating wire 12 Volt
On request possible from 25 pieces. Note: This 12 Volt heating wire is not suitable for higher voltage.
Specifications
- Supply voltage: 12 Volt, 24 Volt and 230V
- Heat output: approx. 10 W/m
- Heating wire: < 1.0 mm Ø
- Insulation: FEP (heat resistant)
- Cold leads 12V: 2x 1,5 m (without plug)
- Cold leads 24V: 2x 1,5 m (without plug)
- Cold leads 230V: none - Self-assembly
- Version: Waterproof
- Hallmark: CE
*Note: when purchasing some products on our webshop, a basic knowledge of electrical engineering is required (for installation).