Product description
Automatic control for two electrical devices. Especially for DIN rail mounting [Note: this temperature controller is not suitable for outdoor use unless placed in an IP65 Outdoor Cabinet. Standard equipped with a Pt1000 sensor. PT1000 sensors work without power supply and are accurate even if you extend the 2-wire connection cable. Optionally, you can also choose the PT1000 10m sensor. The switching temperature is adjustable in increments of one degree Celsius. The display temperature shows 1 decimal place. This temperature controller is very easy to operate. It can also be used as a thermometer and has a memory for the highest and lowest temperature measured. The setting range of the temperature controller is large. Therefore it can be used for frost protection but also for all kinds of applications with electric heating, including heat cables.
Applications
Adjustable hysteresis
The switching accuracy is freely adjustable from 0.1 °C ... 10 °C. Application examples DIN-rail temperature controller Pt1000: Replacement for faulty thermostats in heaters, as backup control for air conditioners, for monitoring and controlling temperatures, e.g. in beer and spirits production or in the greenhouse for temperature-controlled ventilation. In the frost protection application, the connected device or heating ribbon will only receive mains power if the ambient temperature is lower than the switching temperature you set yourself. A value of 3 to 5 °C is common. You can adjust this very easily.
Specifications
- Mounting: 35mm DIN-rail
- Ambient temp: -10...+50 °C
- Output:
- Temperature relay max 3000W (230V / AC 13A)
- Alarm relay max 750W (230V / AC 3.2A)
- Application: heating, cooling & alarm
- Power consumption: approx 3W
- Display: OLED 30x15mm
- Measuring range (temperature switch PT 1000): -99 °C to +850 °C.
- Measuring range (supplied temperature sensor PT 1000): -50 °C to +150 °C.
- Setting: in steps of 1 °C.
- Accuracy: <0.5° FS ±0.1°C
- Display resolution: 0.1 °C
- Sensor input: screw connection
- Sensor cable fault indication: yes
- Dimensions: 72x90x70 mm
- Safety class: IP20
- Optional | Outdoor cabinet - IP65 waterproof
- Type: Schneider Kaedra
- Mounting: 35 mm DIN rail
- M6 ; mounting width 108mm
- Material: plastic
- Color: grey RAL 7035
- Safety class: IP65
- Temperature: -25...60 °C
- Quality mark: CE
Note: Basic knowledge of electronics is required for this product.
*Note: Basic knowledge of electronics is required (for installation) when purchasing some products on our webshop.